➥34 OKIPAGE
10i
User’s Guide
Problem Solving 4
Printer Messages
This section explains printer status messages displayed on the operator
panel LCD.
System Status
MESSAGE: ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
Explanation: Displayed when power is turned on. The lamp and
display light for 1 second.
Action: No action needed. If display is continuous, contact
service.
MESSAGE: ACTIVE
Explanation: Data is being received or is in process of being output.
Action: No action needed.
MESSAGE: INITIALIZING
Explanation: Controller is being initialized.
Action: No action needed.
MESSAGE: WARM UP
Explanation: Printer is warming up.
Action: No action needed.
MESSAGE: ON-LINE
Explanation: Ready to receive data. Second line alternates between
Emulation and PWR SAVE when fuser and fan are
turned off by power save function.
Action: No action needed.
MESSAGE: OFF-LINE
Explanation: Not on-line to receive data.
Action: Press ON-LINE to enable printer to receive data.
MESSAGE: DATA
Explanation: Data remains in buffer.
Action: Press ON-LINE, FORM FEED, ON-LINE to empty
buffer.
MESSAGE: PRINT FONTS
Explanation: Font sample page prints.
Action: No action needed.
MESSAGE: PRINT MENU
Explanation: Menu page prints.
Action: No action needed.
MESSAGE: PRINT DEMO
Explanation: Demo page prints.
Action: No action needed.
MESSAGE: RESET
Explanation: Data not yet printed is deleted from buffer, printer
initializes to user defaults. Temporary DLL fonts are
deleted.
Action: No action needed.
MESSAGE: RESET TO SAVE
Explanation: Data or DLLs in buffer, menu cannot be reset
automatically.
Action: Press RESET button to save changes and exit menu.
MESSAGE: CPYnn
Explanation: Displayed when number of copies is two or more, nn
indicates copies.
Action: No action needed.
