A SERVICE OF

logo

4 OKIPAGE
10i
User’s Guide
Setting Up Your Printer 1
Installing Toner
1. Remove the sponge.
2. Unwrap the toner cartridge. Shake the cartridge from side to side
to distribute the toner.
Only the OKIPAGE 10i Type 5 Series Toner Cartridge will fit in
this unit (Part# 52109001)
3. Peel tape off the bottom.
4. Grasp the lock lever and place the left side of the toner cartridge
into the toner well, under the tab.
5. Lower the right side, aligning the lock lever slot with the ridge in
the drum cartridge.
PUSH
6. When the cartridge is in place, push the lock lever forward until
it stops.
7. Lower the printer cover and press firmly to close.
ridge
slot
tab