Basic Operations 37
Loading Documents
To prevent paper jams and problems during scan-
ning, neatly stack your documents, aligning their
edges, before loading. Do not load documents of
different sizes at the same time.
Tip:
You can load and prepare to transmit a
document while your machine is still
sending or receiving another message
(as long as the document feeder is
clear). To do this, load the document,
select your location and press the
START key. Your document is sent
when the current communication ends.
1
Adjust the document guides to the width of the
paper you are using.
Fig07_01.eps
2
Neatly stack your documents, then insert them
face down into the document feeder. Readjust
the document guides for a snug fit.
Fig07_02.eps
3
Your machine grips the documents, and pulls
the bottom page into the machine.
4
If necessary, use
YES
to set the resolution
of your document.
Document Type Resolution to Use
Normal office documents STD (Standard)
Documents with small type or FINE or EX. FINE
other fine details
Documents with photos or PHOTO
many shades of gray
5
If necessary, use
NO
to set the level of
contrast in your document.
Document Type Contrast to
Use
Documents with normal contrast NORMAL
Documents which are too light LIGHT
Documents which are too dark DARK
6
Your documents are now ready for faxing or
copying.
