ISA Server 2004 Configuration Guide 219
Create the POP3 Server Publishing Rule
Remote access to the Exchange Server POP3 service allows users located away from the
office to download their mail from the Exchange Server to virtually any e-mail client
application. Users must provide a user name and password when they connect to the POP3
service. They download e-mail into their e-mail client application after sending their
credentials. These user credentials are sent in clear text. In a production environment, you
would require an SSL-secured POP3 connection so that user name and password are not
easily accessible to Internet intruders.
Perform the following steps to create the POP3 Server Publishing Rule:
1. Open the Microsoft Internet Security and Acceleration Server 2004 management
console, and expand the server name in the left pane of the console. Click on the
Firewall Policy node.
2. Right click the Firewall Policy node and point to New. Click Server Publishing Rule.
3. On the Welcome to the New Server Publishing Rule Wizard page, enter the name for
the rule in the Server publishing rule name text box. In this example, we will name the
rule POP3 Server. Click Next.
4. On the Select Server page, enter the IP address of the Exchange Server on the Internal
network. In our current example, the IP address is 10.0.0.2. Enter 10.0.0.2 into the text
box. Click Next.
5. On the Select Protocol page, select the POP3 Server protocol from the Selected
protocol list. Click Next.
6. On the IP Addresses page, put a checkmark in the External check box and click the
Address button.
7. In the External Network Listener IP Selection dialog box, select Specified IP
addresses on the ISA Server computer in the selected network. Click the IP address
on the external interface you want to use in the rule. In this example, the IP address is
192.168.1.70, then click Add. The IP address now appears in the Selected IP
Addresses list. Click OK.