Pressure Systems, Inc. Model 9116 User’s Manual
Page 78 www.PressureSystems.com
cc Transducer Coefficients Description
Datum
Type
33 Temperature 6 Temperature Output voltage at 0 psi FLOAT
34 (reserved) Temperature 7 Temperature Output voltage at 0 psi FLOAT
35 Temp Vs Pressure Correction coefficient (t0) FLOAT
36 Temp Vs Pressure Correction coefficient (t1) FLOAT
37 Temp Vs Pressure Correction coefficient (t2) FLOAT
38 Temp Vs Pressure Correction coefficient (t3) FLOAT
4D Pressure Voltage Gain Index INTEGER
4E Temperature Voltage Gain Index INTEGER
5F Current Calculated Pressure (PSI) FLOAT
The User Defined Date field (cc=07) is also a 32-bit integer which may be
encoded in a similar manner. Possible uses are to indicate the date of last user
zero and/or span calibration or possibly the date of next required calibration. If
this optional field is used, the user is responsible for correctly encoding the date
into the appropriate 32-bit integer value. Any modifications of this field (using
the Download Internal Coefficients (‘v’) command) will result in the new value
automatically being entered to transducer non-volatile memory.
The Date of Factory Calibration field (cc=08) identifies the date of factory
calibration for the DH200 transducer (9116). It is stored internally as a 32-bit
integer whose value (viewed as a decimal number) is in the format of yymmdd
(year, month, day).
A special single Other Coefficients array is selected with array index aa=11
(hex). All the valid coefficient indexes (for this array only) are listed in the
following table:
cc Other Coefficients Description
Datum
Type
00 reserved - EU conversion offset term FLOAT
01
EU Pressure Conversion scaler (default=1.0)
FLOAT
02 Reserved - EU conversion Non-Linearity term FLOAT
03 Reserved-Reference Voltage value FLOAT
