Installation User Manual Tx800
24 E-EQ-TX800OGWW-D-ARC
4.4 Installing peripherals
Åkerströms Trux AB offers peripherals to enhance the use of Tx800. Peripherals, ordered with the
computer, comes with pre-installed drivers. If you order them later, or from a supplier other than
Åkerströms Trux AB, you might have to install drivers; if so, refer to the peripheral’s documentation.
4.4.1 Ports for connecting peripherals
Port lid
Figure 9 Ports
Connections and interfaces (port lid)
Position Function
1 Power supply (12V DC 50W)
2 Mic. in
3 Audio out
COM2 RS232 (option:+12V from pin 9)
5 COM1 RS232 (option: +5V from pin 9)
6 VGA (external monitor)
7 Multipurpose connector (USB 2.0, RS232, 5/12 V)
8 RJ-45 Ethernet 10/100 (LAN)
9 2x USB 2.0
10 PS/2 Mouse
11 PS/2 Keyboard
12 Bluetooth antenna connector
The following section describes function and use of the ports.
Strain relief
Use the strain relief to prevent the contacts from disconnecting from the unit while operating.
The brackets for strain relief can be turned around, to fit various contact lengths. Use strain relief
according to fig. 8 for USB and PS/2 connectors.
