A SERVICE OF

logo

Open as PDF
next previous
16 Progress Monitors
MX3 Multi-Charger Plus User’s Guide E-EQ-MX3MCPLUS-F-ARC
Interpreting the LCD Screen
The charge/analyze pocket utilizes an LCD screen to display the status of the charge or analyze
operation. The LCD screen is located to the right of the charge/analyze pocket. Additional
information may be displayed including voltage, capacity and battery fault information, as
appropriate.
Charge Only
When a battery is in the charge/analyze pocket and the analyze dome switch has not been pressed,
the battery is charged. The charge process requires less than 4 hours.
CHARGE
11.2V
Figure 8 LCD Screen, Charge Only
The LCD indicates:
• The battery is charging (CHARGE).
• The battery voltage under charge (11.2VDC). The voltage can vary from 9.0VDC to
12.7VDC.