A SERVICE OF

logo

10 Setup
MX3 Multi-Charger Plus User’s Guide E-EQ-MX3MCPLUS-F-ARC
Setup
Ensure that the location you choose for the charger/analyzer is well ventilated.
Place the charger/analyzer on a horizontal, hard surface.
Plug the power cord into a properly grounded outlet.
On initial power-up, all 5 pocket LEDs will light yellow for a few seconds.
The Charge Pockets
Figure 3 Charge Pocket Components
1. Battery Charging Pocket
2. Retaining Pins
3. Battery Charger Contacts
4. LED Indicator