64 Cisco Radio
HX1 Reference Guide E-EQ-HX1RG-C-ARC
Profiles Tab
When using the Cisco ACU to configure the radio card, a profile is used. If desired, multiple
profiles can be created as needed.
Figure 4-27 Cisco ACU, Profiles Tab
To connect to the network, either edit the current profile (Profile0) or create a new profile.
Figure 4-28 Cisco ACU, Profiles Properties
Several configuration parameters are included in the Profile Property Tabs. The table below
highlights the parameters and includes the default values.
Profile Parameter Default
SSID Blank
Client Name Blank
Infrastructure Mode Yes
Power Save Mode Fast PSP
Network Security Type None
WEP No WEP
Authentication Types Open
Mixed Mode Disabled
World Mode Disabled
Data Rates Auto
Transmit Power Max
Offline Channel Scan Enabled
Please refer to the “No Security”, “WEP”, “WPA” or “WPA (LEAP)” section later in this chapter
for more details on profile property entries.
