Wavelink Avalanche Enabler Configuration 109
E-EQ-VX5RG-G-ARC VX5 Reference Guide
Adapters
Note: LXE recommends the user review the network settings configuration utilities and the
default values in Chapter 4 before setting All Adapters to Enable in the Adapters applet.
Figure 3-18 Adapters Options – Network
Manage Network
Setting
When enabled, the Enabler will control the network settings. This
parameter cannot be configured from the Avalanche Mobility Center
Console and is enabled by default.
Manage Wireless
Settings
When enabled, the Enabler will control the wireless settings. This
parameter cannot be configured from the Avalanche Mobility Center
Console and is disabled by default.
Current Adapter Lists all network adapters currently installed on the mobile device.
Primary Adapter Indicates if the Enabler is to attempt to configure the primary adapter
(active only if there are multiple network adapters).
Use Avalanche
Network Profile
The Enabler will apply all network settings sent to it by the
Avalanche Mobility Center Console.
