Strap Assemblies 51
E-EQ-HX2RG-B HX2 Reference Guide
Removing/Replacing the Armband Straps
Note: Remove the HX2 and any of its tethered devices from the Armband before removing and
replacing the armband straps.
The armband is a lightweight, sturdy mounting platform for the HX2. There are two armband
straps. The shorter strap is used at the end-user wrist area and the longer strap is used at the end-
user forearm area. A armband strap replacement kit is available from LXE. See Accessories.
Armband – Bottom View
1 Removable Mesh Arm Cover
2 Arm Strap Brackets
3 Adjustable Arm Straps
Figure 1-44 Removing/Replacing the Armband Straps
Figure 1-45 Armband Straps
1 Hook Fabric
2 Loop Fabric
3 Connection tabs.
4 Strap side for inside.
5 Strap side for outside.
1. Slip each end of the arm strap through the arm strap brackets ensuring the hook and loop
fastening sections are on the outside of the armband.
2. The shorter strap is used for the wrist area and the longer strap is used for the forearm area.
3. Press the straps hook end against the straps loop fastener to secure each end of the strap to the
armband. After both straps are loosely fastened in this manner, snap the HX2 onto the
armband bracket.
