112 Settings | Control Panel Options
HX2 Reference Guide E-EQ-HX2RG-B
Alpha Tab
Note: Alpha tab is not available when the HX2 has a Dual Alpha or Triple Tap keypad.
Figure 3-25 Control Panel – Keypad – Alpha Tab
Tap the OK button to save the changes. Tap the X button to ignore changes and return to the
Control Panel. Tap the ? button for Help. The changes take effect immediately.
Persistence Select the Off radio button (disable) when the Alpha key is to be tapped
every time an alpha character is desired. The default value is On
(enabled).
Configure 0, 1 Use the drop down boxes to assign a specific number of keyclicks, of
either the 0 or 1 key, to map another key command to the 0 or 1 key
sequence. The same key command can be assigned to more than one 0
or 1 keyclick sequence.
Keypad Backlight Select the Off radio button (disable) when the keypad backlight is to
remain Off regardless of the OS event in process. The default value is
On (enabled). When On the keypad backlight responds to OS events as
designed. When On, keypad backlight behavior is based on the settings
of the Display Backlight Timer.
