3.5 Re-attaching the soft stop
mechanism
Fig. 4
u
Screw the ball stud
Fig. 4 (3)
into the new fastening hole.
u
Slide the tension spring
Fig. 1 (11)
inwards again.
u
Screw the retainer
Fig. 4 (1)
on.
u
Attach the soft stop mechanism
Fig. 4 (2)
onto the ball
stud.
4 Kitchen cabinet setup
This is a built-in appliance and is therefore completely
enclosed by a kitchen cabinet. The kitchen cabinet
surrounding the appliance must be set up exactly in
accordance with the specified fitting dimensions and must
allow sufficient air circulation to ensure correct operation of
the appliance.
With side-by-side configurations,
provide a separate kitchen cabinet
for each appliance.
If possible, have a professional install the appliance in your
kitchen cabinet unit.
The wall of the adjacent cabinet must be at least
5/8 '' (16 mm) thick.
4.1 Air circulation in the kitchen
cabinet
Fig. 5
- An effective ventilation cross-section of at least 31 in
2
(200 cm
2
) must be present at the air intake
Fig. 5 (1)
and
air outlet
Fig. 5 (2)
.
- The upper ventilation cross-section can be set up directly
above the appliance
Fig. 5 (2)
, near the ceiling above a
cabinet
Fig. 5 (3)
, or as an air vent in an intermediate
ceiling
Fig. 5 (4)
.
Kitchen cabinet setup
4
