5: Commands and Levels
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
Forwards (tunnels) network data in accept mode tunnel-
ing.
Discards all data coming in from the accept mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
Restores the default priority for the interface.
Sets the priority for interface.
<number> = priority number.
Enters the next lower level.
Restores the default accept mode as "always".
Uses the default port number as the local port for accept
mode tunneling.
The default port is 10000 + #, where # is the line number
Restores the default protocol as "TCP".
Defaults the accept mode start character.
Restores the default 45 second accept mode TCP keep
alive timeout.
Sets an email profile to use to send an email alert upon
establishing
an accept mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
an accept mode tunnel.
<number> = the number of the email profile to use.
Returns to the tunnel level.
Characters already in the serial data buffer are retained
upon establishing
an accept mode tunneling connection.
Flushes the serial data buffer upon establishing an accept
mode tunneling
flush start character disable
Enables forwarding of the accept start character into the
network.
flush start character enable
Disables forwarding of the accept start character into the
network.
Disconnects the active accept mode tunneling connection.
Sets the port to use for accept mode tunneling.
<number> = number of the port to use.
Removes the accept tunnel AES decrypt key.
Removes the accept tunnel AES encrypt key.
Discontinues sending email alerts upon establishing an
accept mode tunnel.
Discontinues sending email alerts upon closing an accept
mode tunnel.
Disables the accept mode TCP keep alive timeout.
XPort® Pro Lx6 Embedded Device Server Command Reference 40
