A SERVICE OF

logo

CRANKSHAFT/TRANSMISSION 9-23
Transmission
Shift Pedal Removal
Mark [A] the position of the shift lever [B] on the shift shaft
so that it can be installed later in the same position.
Remove:
Shift Lever B olt [C]
Shift Lever
Remove:
Footpeg Bracket Bolts [A]
Footpeg Bracket [B]
Remove the bolt [A], footpeg [B] and shift pedal [C].
Shift Pedal Installation
Apply grease to t he oil seal lip.
Press the oil seals [A] in the shift pedal housing [B] so that
the oil seal surfaces are flush with the housing end [C] as
shown.
Apply grease to the sliding surfaces [A ] on the footpeg
holder [B].
Apply a non-permanent locking agent to the shift pedal
mounting bolt [C].
Tighten:
Torque - Shift Pedal Mounting Bolt: 34 N·m (3.5 kgf·m, 25
ft·lb)
Footpeg Bracket [D]
Shift Pedal [E]
Oil Seals [F]