A SERVICE OF

logo

Open as PDF
next previous
FUEL SYSTEM (DFI) 3-89
Throttle Body Assy
•
Loosen:
Throttle Assy Holder Clamp Bolts [A]
Air Cleaner Duct Clamp Bolts [B]
•
Remove:
Right and Left Side Covers (see Frame chapter)
Coolant Reserve Tank (see Cooling System in the Peri-
odic Maintenance chapter)
Crankcase Breather Hose
Right and Left Air Cleaner Housing Mounting Bolts [A]
•
Move [A] the air cleaner housing backwards.
•
Pull [B] the throttle body assy out of the holders [C].
•
Slide [A] the throttle body assy [B] right and remove it.
•
Loosen the locknut and screw in the throttle cable adjuster
fully to give the cables plenty of play.
•
Remove the right handlebar switch housing and take out
the accelerator cable upper end [A] and the decelerator
cable upper end [B].