A SERVICE OF

logo

8-6 ENGINE REMOVAL/INSTALLATION
Engine Removal/Installation
Remove:
Camshaft Position Sensor Connector [A]
Injector Harness Connector [B]
Remove the vacuum switch valve hose from the air
cleaner housing.
Remove:
Breather Hose End [A]
Engine Ground Cable Terminal Bolt [B]
Support the engine with a suitable stand [A].
Put a plank [B] onto the suitable stand for engine balance.
Remove:
Right and Left Upper Engine Mounting Bolts [A]
Front Engine Bracket Bolts [B]
Front Engine Bracket [C]