A SERVICE OF

logo

Open as PDF
next previous
Setting Communication Clock Jumpers: Set the communication-clock jumpers for ports 0 and
1 as shown. The jumper settings are described on the following pages.
The location of the receive- and transmit-clock jumpers for ports 0 and 1 are different for the two levels of
the adapter. The following shows the jumper locations for both adapters and the valid settings for each
port.
Figure 2-6. Communication Jumper Settings
Port 0 or 1
Configuration
Receive
Clock
Transmit
Clock
Remote clock
Transmit clock divided by 16
Transmit clock divided by 32
Installation and Requirements 2-9