A SERVICE OF

logo

Open as PDF
next previous
ENWW 4-19
Printing on cards and smaller-sized media
1 Raise the output tray and remove any media from the input tray.
2 Insert up to 60 cards, or a stack of media that does not exceed the height of the paper
width guide, print-side down along the right side of the input tray until it stops.
3 Open the small media guide by moving it 90 degrees clockwise from start to end position.
4 Press the button on top of the paper width guide and slide the guide to the right until it
stops at the edge of the cards.
5 Press the input tray lock and retract the tray until the small media guide stops at the edge
of the cards.
6 Lower the output tray.
If you are printing on thick paper (such as cardstock), you can use the rear manual feed slot.
See “Printing with the front or rear manual feed slot”.
2
4
3
1
5
6