Hewlett-Packard 9600 Series Manual

A SERVICE OF

next previous

3-1 ENWW

3

Using print cartridges and

accessories

Using the auto-duplex unit

You can print on both sides of a sheet of paper automatically when the auto-duplex unit is

installed on the printer.

For instructions on printing with the auto-duplex unit, see “Printing on both sides (duplexing)”.

Installing the auto-duplex unit

1 Remove the rear access panel by pushing the release buttons towards each other and

pulling the rear access panel out of the printer.

2 Insert the auto-duplex unit straight into the back of the printer until both sides snap into

place.

The auto-duplex unit is a standard part in the hp deskjet 9670. It may be purchased separately

in some countries/regions (see “HP supplies and accessories”).

Do not press the buttons on either side of the auto-duplex unit when installing it. Use these

buttons only for removing the auto-duplex unit from the printer.

3