Chapter 3. Programming Site Data
48 Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.7.2 Entering Custom Cp Data in the Energy Option (cont.)
2. The next prompt asks from which source — a fixed value or table —
the PT878 will use for fluid density values. Use the [
W] and [X] keys
to scroll to the appropriate radio button, and press
[ENTER].
3. The menu now varies, depending on your selection in step 2.
• If you selected “Fixed,” the PT878 asks for the fixed fluid density.
Use the numeric keys to enter the desired value, and press
[ENTER].
• If you selected “Table,” the meter highlights the “Edit Table” button.
Figure 25: Fluid Density Table
a. Press [ENTER] to open the Edit Density table, shown in Figure 25
above.
b. Use the numeric keys to enter the desired temperature in degrees
Kelvin, and press
[ENTER].
c. Press the [X] key to move to the kg/m^3 column (density in
Kilogram/cubic meters). Use the numeric keys to enter the desired
value, and press
[ENTER].
Edit Density
Cancel OK
°Kelvin kg/m^3
1
2
3
4
5
