6. WEB FUNCTIONS
6-21
Group setting screen (Connection)
Click [Connection] on the Group setting screen to show the Connection settings
screen. Enter connection settings as applicable.
Group setting screen (Firewall)
Click [Firewall] on the Group setting. Use this screen to block unwanted communica-
tions. Set the screen according to application and system.
Item Description
Auto connection Check [9] to automatically connect the topmost items on the con-
nection list (Standard/Browser) when power is turned on.
Persistent Check [9] to activate automatic reconnection when a request from
the network is received.
Note: This function will not be activated when the power is turned
off manually or by a function of unit (such as [Auto disconnection]
below).
Auto disconnec-
tion
• Check [9] to automatically disconnect the group’s line when be-
low two conditions are met.
• If applied, choose disconnect condition (Any Time, No Tx&Rx, No
Tx, No Rx).
• If applied, enter disconnect time (001 - 999 minutes).
Apply button Click to apply settings. If group is doing PS, changes are applied af-
ter completion of PS.
Cancel button Click to restore previous settings.
Item Description
Prohibit the routing of
NBT & MIcrosoft-DS
Check to prohibit NBT and Microsoft-DS. The default setting is
“checked”.
Refuse demand of
IDENT
Refuse demand of IDENT. Place a [9] to activate. The default
setting is “checked”.
