MO270-EU-EN v2.3 5/14
9
SYSTEM INFORMATION
BACK EXIT
FIRMWARE VERSION: 187
CONF.
DATE: 2012/3/16
NAME: OWNER
NUMBER: 00
OWNER:
DATA FORMAT Setting
This allows the user to set the numerical delineator to a decimal
point (.) or to a comma (,).
1. Navigate to DATA FORMAT in the SETTINGS menu and
then press .
2. Scroll to the desired selection and then press .
3. Press EXIT or BACK when finished.
BLUETOOTH ON/OFF (Wireless operation)
1. To activate the Bluetooth
TM
function that allows the Sensor to
talk to the Display analyer, select BLUETOOTH from the
SETTINGS menu.
2. Scroll to PC MODE or OFF and press .
3. Press BACK or EXIT when done.
Note: Software developers may contact Extech for the MO270
communication programming protocol.
TIME/DATE and FORMAT Settings
1. Navigate to TIME/DATE in the SETTINGS menu and then
press .
2. Scroll to the desired field and then press .
3. To change the Date or Time, use the left/right arrow keys to
move the triangle shaped pointer to the digit that is to be
changed.
4. Use the up/down arrows to change the digit’s value. Press
to store the new value and to switch off the arrow
pointer.
5. To select a time format, scroll to the desired field (MM/DD/YYY, DD/MM/YYY, 12H, 24H, AM, or
PM) and press . When in item is highlighted it is selected.
6. Press EXIT or BACK when finished.
SYSTEM INFORMATION (INF)
1. To view the System Information, navigate to SYSTEM INF in
the SETTINGS menu and then press .
2. The OWNER NAME and NUMBER can be changed by the
user; all other fields are provided for informational purposes.
3. Scroll to the OWNER NAME or NUMBER field and press .
4. An alpha-numeric utility will appear allowing the user to select
text using the arrows buttons and the button.
5. To lock the Owner information so that it can not be
overwritten, press the CONF (confirmation) button.
6. Press BACK or EXIT when finished.
DATA FORMAT
BACK EXIT
DECIMAL DELINEATOR: , .
BLUETOOTH
BACK EXIT
PC MODE
OFF
TIME/DATE
BACK EXIT
DATE:01-05-2011
MM/DD/YYYY
DD/MM/YYYY
12H AM PM
24H
TIME: 22:41:10
