MO270-EU-EN v2.3 5/14
8
SETTINGS Menu Basics
1. Turn the analyzer ON.
2. Press and hold the button for > 2 seconds until the Main Menu appears
3. Press F3 (SETTINGS) to view the SETTINGS menu
4. Navigate the menu and sub-menus as desired. Each menu item is explained in the next section.
SETTINGS Menu in Detail
AUTO POWER OFF (APO) AND BACKLIGHT Settings
1. The APO or backlight timeout can be set in minutes.
2. Navigate to the APO/BL sub-menu in the SETTINGS menu
and press .
3. Scroll to the desired setting.
4. Press and then press EXIT or BACK when done.
CHANNEL Setting (wireless)
Select the common channel over which the display analyzer and
sensor will communicate. If several sensors are owned, a unique
channel number can be used for each.
Note that analyzer and sensor units must be interlocked when
changing to a new matching channel number.
1. To set the channel, first navigate to the CHANNEL sub-menu
in the SETTINGS mode and then press .
2. Navigate to the desired channel and then Press . The
Channel number will highlight.
3. Press EXIT or BACK when finished.
4. See Bluetooth section to turn on the wireless communication.
IMPORTANT NOTE: When two or more devices are set to the same channel, communication errors
between devices may result. Use separate channel numbers for multiple devices wherever possible.
Optional Sensor module is part number MO270-X
APO / Backlight
Back Exit
APO:
5 10 20 30 OFF
Backlight:
.5 1 2 5
CHANNEL SELECT
BACK EXIT
CH 0
CH 1
CH 2
CH 3
CH 4
CH 6
CH 7
CH 8
CH 9
CH 5
SETTINGS
BACK EXIT
CHANNEL
APO/BL
BLUETOOTH
TIME / DATE
SYSTEM INF
DATA FORMAT
MAIN MENU
MEASURE
SETTINGS
