3-37
Catalyst 3750, 3560, 3550, 2975, 2970, and 2960 Switch System Message Guide
OL-8551-04
Chapter 3 Message and Recovery Procedures
FM Messages
Explanation The feature manager is able to allocate a hardware label for the interface. The interface
needed a label before, but no label was available. [chars] is the label.
Recommended Action No action is required. (This message pairs with the FM-3-NOLABEL message
and means that the previous error condition has rectified itself.)
Error Message FM-3-GOTVLABEL: Got label for VLAN [dec].
Note This message applies only to Catalyst 3550 switches.
Explanation The feature manager is able to allocate a hardware label for the VLAN. The VLAN
needed a label before, but no label was available. [dec] is the VLAN ID.
Recommended Action No action is required. (This message pairs with the FM-3-NOLABELVL
message and means that the previous error condition has rectified itself.)
Error Message FM-3-ILLEGALCOPY: Illegal copy of [chars] access group [chars] from
[chars] label [dec] to [dec].
Note This message applies only to Catalyst 3550 switches.
Explanation An internal software error occurred. The first [chars] is either ip or mac, the second
[chars] is an access list name, the third [chars] is either port or vlan, and the two [dec] values are
label numbers.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
running-config user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
“Error Message Traceback Reports” section on page 2-7.
