Replaying 91
Shooting / Replaying with a TV Monitor
A video-compatible television connected via the supplied AV cable AVC-DC100 can
be used to view images as you shoot or replay them.
1
Turn the main dial to and confirm
that the TV is turned off.
2
Attach AV cable ACV-DC100 to the A/V
OUT terminal on the camera.
3
Plug the other ends of the AV cable to
the video in and audio in jacks on the TV.
4
Turn on the TV and switch it to Video
mode.
5
Turn the camera’s main dial to or .
• The image will appear on the TV. Shoot or
replay images as usual.
• If the images are not appearing on the TV
when shooting, press the Display button.
• No image will display in the LCD monitor when the camera is connected to a TV
monitor.
• The video output signal can be switched (NTSC or PAL) to accommodate different
regional standards (p. 105). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
• Plug the audio plug of the AV cable into the TV’s monaural jack. Please consult the
TV’s manual for details.
• A TV monitor cannot be used in
mode.
To the
Video In Jack
To the
Audio In Jack
Yellow
Plug
Black
Plug
