88 Replaying
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 100 images may be
marked per slide show. Images display in the order of their selection.
1
Display the slide show menu.
2
Press the or arrow on the omni
selector to select [Program]. Press the
or arrow to select [Show 1],
[Show 2] or [Show 3] and press the Set
button.
• A bright green bar will appear beside a show
already containing images.
3
Press the , or arrow on the
omni selector to choose [Select] and
press the Set button.
4
Mark images to include in the show.
Single Replay
• Move between images with the
or
arrow on the omni selector and mark or
remove marks from images with the
and
arrow.
• The selection number and a bright green bar
will show at the top of marked images.
Multi Replay
• Press the
button to switch to multi replay (3
images).
• Press the or arrow on the omni selector
to select an image and mark or remove marks
from images with the
and arrow.
• You can deselect all the images in a show by
pressing the Set button, selecting [OK] with the
or arrow and pressing the Set button
again.
• The selection number and a bright green bar
will show at the bottom of marked images.
5
Press the Menu button.
• The image selection screen will close.
