Adjusting the Machine
4-61
4
Customizing Settings
Adjusting Creep (Displacement) Correction
This mode enables you to adjust the displacement of pages that occurs between
the outermost and center page when the Booklet mode is set.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Creep (Displacement) Correction Adjustment].
2
Select the desired paper type ➞ press [Adjust].
3
Press [▼] or [▲] to adjust the correction width ➞ press [OK].
NOTE
To enter values in millimeters, press [mm].
Fold Placement Adjustment
You can adjust the folding positions of the paper when the C-Fold or Z-fold mode is
set.
NOTE
[Fold Placement Adjustment] is displayed only if the optional Document Insertion/Folding
Unit-F1 is attached to the optional Finisher-AD1 or Saddle Finisher-AD2.
1
Press (Additional Functions) ➞ [Adjustment/Cleaning] ➞
[Fold Placement Adjustment].
2
Press [C-Fold Placement Adjustment] or [Z-Fold Placement
Adjustment].
3
Press [▼] or [▲] to adjust the folding positions ➞ press [OK].
If you selected [C-Fold Placement Adjustment], adjust the two folding positions
(A and B).
