12-41
If a Message Such as <Paper di. from set size/type.> is displayed
Troubleshooting
If a Message Such as <Paper diff. from set
size/type.> is displayed
If all of the following do not match, a message such as <Paper di. from set size/type.> is
displayed:
The paper size specied on the printer driver (Only when printing from a computer)
The paper size specied in the <Paper Settings> menu on the machine
The size of the paper loaded in the paper drawer or stack bypass tray
If such a message is displayed and you are unable to make a copy or print job, change the
paper size in the items described above so that they all match.
The following chart is a list of the messages. See “Error Messages,” on p. 12- 24 for details
concerning the messages and remedies.
Messages displayed when the paper sizes do not match●
Message Cause
Copy
Load LTR to Drawer 1.
(Depending on the paper supply and settings, the message
displayed may vary.)
The following did not match:
The paper size specified on the machine
The size of the paper loaded in the paper drawer
–
–
Paper diff. from set size/type.
Remove the jammed paper from inside the front cover. The following did not match:
The paper size specified on the machine
The size of the paper loaded in the paper drawer
–
–
Print
Load LTR to Drawer 1.
(Depending on the paper supply and settings, the message
displayed may vary.)
The following did not match:
The paper size specified on the machine
The size of the paper loaded in the paper drawer
–
–
Paper diff. from set size/type. The following did not match:
The paper size specified on the printer driver
The paper size specified on the machine
The size of the paper loaded in the paper drawer
–
–
–
Load paper The following did not match when printing:
The paper size specified on the printer driver
The paper size specified on the machine
–
–
Remove the jammed paper from inside the front cover. A paper jam occurred because the size of the paper loaded
in the paper drawer was different from that of the paper
specified on the machine and printer driver.
Load the correct size paper if the size of the paper loaded in the paper drawer does not match. See “Reloading the Paper,” on p. 12-42 for
instructions.
Change paper size if the paper size specied on the machine does not match. See “Changing the Paper Size Setting,” on p. 12-42 for
instructions.
For print jobs, you need to specify the paper size from your computer.“
–
–
–
–
–
–
