9032785 SNMP Management 73
Table 5-3. Port Variables
Compilin
MIB Extensions: Cabletron Website
The MIBs supported by the ELS100-24TXM switch must be compiled into
the SNMP network management platform before the switch can be
managed. The supported MIBs are available via the Internet at the
following address:
ftp://134.141.197.25/pub/snmp/mibs/enterprise
file name:
ctELS100-NG-mib.txt
The four standard MIB specifications listed above with which the
ELS100-24TXM switch is compliant are generally available with the
SNMP management platform.
Application modules specific to managing the ELS100-24TXM switch
under different network management platforms are available. Contact
Cabletron Systems for information regarding supported platforms. If you
require assistance, contact the Cabletron Systems Global Support Center
directly at either:
(603) 337-3219
or
(603) 332-9400
Variable Description
PortId Port number or ID.
PortStatus Link status of the port.
PortDuplexStatus Full/half duplex settin
of the port. Not confi
urable if auto-
ne
otiation is enabled.
PortName Text name assi
ned to the port.
PortEnable Enable/disable status of the port.
PortSpeed Speed the port is operatin
at. Not confi
urable if auto-ne-
otiation is enabled.
PortAutone
Enable Enable/disable auto-ne
otiation on the port.
PortFlowControlEnable Enable/disable flow control on the port.
PortType The type of port, either: 10Base-T, 100Base-TX, 100Base-
FX.
