Configuring a complex inter-VRF solution
Page 64 | Configure VRF-lite
Configuration files for each external router used in the topology and its associated
route table is below. None of the external routers are VRF aware.
hostname Internet_router
!
vlan database
vlan 2 state enable
!
interface port1.0.2
switchport access vlan 2
!
interface vlan1
ip address 192.168.100.254/24
!
interface vlan2
ip address 192.168.200.1/24
!
router bgp 200
bgp router-id 192.168.200.1
neighbor 192.168.100.1 remote-as 100
neighbor 192.168.100.1 activate
!
ip route 0.0.0.0/0 192.168.200.254
!
Internet_router#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.200.254 to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 192.168.200.254, vlan2
B 1.1.1.1/32 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 2.2.2.2/32 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 3.3.3.3/32 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 4.4.4.4/32 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 5.5.5.5/32 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.10.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.13.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.14.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.15.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.16.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.17.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.18.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.19.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.20.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.30.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.40.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
B 192.168.43.0/24 [20/0] via 192.168.100.2, vlan1, 00:09:30
B 192.168.44.0/24 [20/0] via 192.168.100.2, vlan1, 00:09:30
B 192.168.45.0/24 [20/0] via 192.168.100.2, vlan1, 00:09:30
C 192.168.100.0/24 is directly connected, vlan1
B 192.168.140.0/24 [20/0] via 192.168.100.1, vlan1, 00:09:30
C 192.168.200.0/24 is directly connected, vlan2
Internet_router#
