A SERVICE OF

logo

Procedures
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07 3-37
Configuring the Aastra CNX
Voice over IP/RTP
8 Under the Voice over IP object, click “RTP”.
Result: The RTP attributes display.
9 Configure the attributes as required.
10 Click to save the configuration to the Aastra CNX and to the CompactFlash card.
Step Action
Attribute Default Valid Values/Description
No Voice Path
Teardown
DISABLE ENABLE
DISABLE
Description: Specifies whether or not the CNX uses
no voice path teardown for Voice over IP.
Path Teardown Timer
Note: Enabled only if
“No Voice Path
Teardown” is set to
ENABLE.
15 10 to 100
Description: Specifies the period of time, in seconds,
that the Aastra CNX waits before automatically
clearing a call if it receives no voice Real-Time
Transport Control Protocol (RTCP) packets.