A SERVICE OF

logo

Connect to the console
1-6 ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Remote connection
Procedures
To connect a remote PC and an Aastra CNX to an Ethernet LAN:
To connect a modem:
Illustration
Step Action
a Attach one end of an Ethernet cable to the Ethernet port on the PC, and the other
end to a LAN port.
b Attach one end of an Ethernet cable to an Ethernet port on the back panel of the
Aastra CNX, and the other end to a LAN port.
Step Action
a Attach the 9-pin male connector on the serial cable to the female console port on
the rear panel of the Aastra CNX.
b Attach a 25-pin male connector on the modem cable to the modem's DB-25
RS-232 port.
DB-9 port on PC
DB-9 to DB-9 console cable
Console port
PC or terminal
DB-9 to DB-25 modem cable
Modem (AT or Hayes compatible)
DB-25 RS-232 po
rt
PHONE
DWR
(LEASE
3810
(LEASED)
3810
NMS
DTE
DIAL
To console port
on Aastra CNX
Aastra CNX
CONSOLE
10/100 ENET
RESET
T1 / E1
1
2
4
3
2
1
100-240
VAC
1.0A
47-63HZ
Ethernet LAN