214 CHAPTER 7: AAA COMMANDS
or session characteristic. (For a list of authorization attributes, see
Table 40 on page 209.)
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To change the value of an attribute, enter set mac-usergroup
attr with the new value. To delete an attribute, use clear
mac-usergroup attr.
Examples — The following command creates the MAC user group
eastcoasters and assigns the group members to VLAN orange:
WX4400# set mac-usergroup eastcoasters attr vlan-name orange
success: change accepted.
See Also
■ “clear mac-usergroup attr” on page 175
■ “display aaa” on page 180
set mobility-profile Creates a Mobility Profile and specifies the MAP access point and/or wired
authentication ports on the WX switch through which any user assigned
to the profile is allowed access.
Syntax —
set mobility-profile name name {port {none | all |
port-list}} | {dap {none | all | dap-num}}
■ name — Name of the Mobility Profile. Specify up to 32 alphanumeric
characters, with no spaces.
■ none — Prevents any user to whom this profile is assigned from
accessing any MAP access point or wired authentication port on the
WX switch.
■ all — Allows any user to whom this profile is assigned to access all
MAP access ports and wired authentication port on the WX switch.
■ port-list — List of MAP access ports or wired authentication ports
through which any user assigned this profile is allowed access. The
same port can be used in multiple Mobility Profile port lists.
