156 CHAPTER 6: IP SERVICES COMMANDS
See Also
■ “clear system ip-address” on page 115
■ “display system” on page 42
■ “set interface” on page 135
set timedate Sets the time of day and date on the wireless LAN switch.
Syntax —
set timedate {date mmm dd yyyy [time hh:mm:ss]}
■ date mmm dd yyyy — System date:
■ mmm — month
■ dd — day
■ yyyy — year
■ time hh:mm:ss — System time, in hours, minutes, and seconds.
Default — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — The day of week is automatically calculated from the day you
set. The time displayed by the CLI after you type the command might be
slightly later than the time you enter due to the interval between when
you press Enter and when the CLI reads and displays the new time and
date.
Configure summertime before you set the time and date. Otherwise,
summertime’s adjustment of the time will make the time incorrect, if the
date is within the summertime period.
Examples — The following command sets the date to March 13, 2003
and time to 11:11:12:
WX4400# set timedate date feb 29 2004 time 23:58:00
Time now is: Sun Feb 29 2004, 23:58:02 PST
See Also
■ “clear summertime” on page 115
■ “clear timezone” on page 116
