Filter
Top Products
Tie the plastic hose guide to the tap with a string to pre-
vent that the drain hose unhooks when the appliance is
emptying.
•O
Onto a sink outlet spigot.
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose to pre-
vent waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
•D
Directly into a drain pipe at a height
of not less than
60 cm and not more than 100 cm.
MAX 100cm
The end of the drain hose
must always be v
ventilated
,
i.e. the inside diameter of
the drain pipe must be
larger than the outside di-
ameter of the drain hose.
The drain hose must not
be kinked.
•D
Directly to a built-in drain pipe
in the room wall.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your Local Centre.
C
Connections overview
115 cm 140 cm
mc150mc100
max 100 cm
min. 60 cm
max 100 cm
min. 60 cm
mc9 0 mc115
9
9