Zanussi ZWH 7160 AP Washer User Manual


 
Electrical connection
The appliance must be earthed.
Make sure that the electrical information on the rating
plate agree with your domestic power supply.
Always use a correctly installed shockproof socket.
Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
Do not replace or modify the mains cable yourself.
Contact the After Sales Service.
Make sure that the mains plug and cable is not
squashed or damaged by the back of the appliance.
Make sure that the mains plug is accessible after in-
stallation.
Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
This appliance complies with the E.E.C. Directives.
Special accessories
Rubber feet kit
Available from your authorized dealer.
The rubber feet are particularly recommended on floating,
slippery and wooden floors.
Mount the rubber feet to prevent vibration, noises and dis-
placement of the appliance during operation.
Read carefully the instructions supplied with the kit.
First use
Ensure that the electrical and water connections
comply with the installation instructions.
Ensure that the drum is empty.
Before the first wash, run a cotton cycle at the
highest temperature without any laundry in the
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the main wash compartment and
start the machine.
Personalisation
Buzzer
The appliance is provided with an acoustic device, which
sounds in the following cases:
at the end of the cycle;
if there is a fault.
l
e
n
sr
ep
u
S
le
n
sre
p
uS
e
di
pa
R
po
t
s
l
e
o
p
S
egassio
r
f-
i
t
n
A
By pressing the 4
4
and 5
5
buttons simultaneously for
about 6
6 seconds
, the
acoustic signal is deacti-
vated (except if there is a
fault).
By pressing these 2 buttons again, the acoustic signal
is reactivated.
Child safety lock
This device permits you to leave the appliance unattended
so you do not need to worry that children might be injured
by or cause damage to the appliance. This function re-
mains enabled also when the appliance is not working.
There are two different ways to set this option:
1. Before pressing button 9
9
: it will be impossible to start
the appliance.
2. After pressing button 9
9
: it will be impossible to
change any other programme or option.
.
p
m
e
T
n
ere
g
u
f
i
rt
n
e
C
eg
a
ros
s
E
To enable or disable this
option press simultane-
ously for about 6 seconds
buttons 2
2
and 3
3
until on
the display, the icon
appears or disappears.
10