Filter
Top Products
You can cancel or modify the delay time at any moment, before you press
button 9
9
.
Selecting the delay start :
• Select the programme and the required options.
• Select the delay start by pressing button 8
8
.
• Press button 9
9
:
– the appliance starts its hourly countdown.
– the programme will start after the selected delay has expired.
Cancelling the Delay Start after having started the programme:
• Set the appliance to PAUSE by pressing button 9
9
.
•
Press button 8
8
once. On the display will appear
'
'
.
• Press button 9
9
again to start the programme.
• The selected delay can be changed only after selecting the washing
programme again.
• The door will be locked throughout the delay time. If you need to
open the door, you must first set the appliance to PAUSE by press-
ing button 9
9
and wait a few minutes before opening the door. After
you have closed the door, press the same button again.
The Delay Start c
cannot
be selected with the draining programme.
9
Start/Pause
ez
u
a
P
/
tra
t
S
es
uaP/t
ra
p
éD
S
Start the programme by pressing the button 9
• To s
start
the selected programme, press the button 9
9
, the corresponding
green pilot light stops flashing. The pilot light 1
10
illuminates to indicate
that the appliance starts operating and the door is locked. If you have
chosen a delayed start, the appliance will begin the countdown.
• To i
interrupt
a programme which is running, press the button 9
9
: the corre-
sponding green pilot light starts flashing. It is possible to c
change
some
options of a running programme before the programme carries them out.
• To r
restart
the programme from the point at which it was interrupted, press
the button 9
9
.
• After the programme has started the door is locked. If, for any reason, you
need to o
open the door
, set firstly the appliance to PAUSE by pressing the
button 9
9
. After a few minutes it will be possible to open the door.
If the door remains locked, this means that the appliance is already heat-
ing or that the water level is too high. In any case, do not try to force the
door!
If you cannot open the door but you need to open it you have to switch
the appliance off by turning the selector dial to
. After a few minutes
the door can be opened (p
pay attention to the water level and tempera-
ture!
). After closing the door, it is necessary to select the programme and
options again and to press the button 9
9
.
17