Zanussi ZWH 7140 AP Washer User Manual


 
1 2 3 4 5 6 7
910
8
1
P
Programme selector dial
T
Turn the programme selector dial to the required programme. The selector
dial can be turned either clo
ckwise or counter-clockwise.
The green pilot
light of the button 9
9
starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 9
9
will flash 3
times and the message E
Err
is displayed to indicate a wrong selection. The
appliance will not perform the new selected programme.
To s
switch the appliance off
, turn the programme selector dial to the posi-
tion
.
To c
cancel
or c
change
a running programme, switch the appliance off by
turning the programme selector dial to the position
. Select the new
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 9
9
again. The water in the tub will
be not emptied out.
2
Temperature button
90°
60°
40°
30°
Temp.
P
Push the temperature button to select the most suitable temperature for
washing your laundry .
14