Filter
Top Products
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
If you need to open the door, you must first
set the washing machine to PAUSE by
pressing the Start/Pause button, after that
you need to wait about 2-3 minutes to
release door lock.
It is possible to change any option before the
program carries it out. The option “Super Quick”
cannot be modified after the Start/Pause has
been pressed.
Changing a running program is possible only
by resetting it. Turn the program selector dial
to “Off” and then to the new program position.
The washing water in the tub not be emptied
out. Start the new program by depressing the
“Start/Pause” button again.
Depress the “Start/Pause” button to interrupt a
program which is running, the corresponding
light starts to flash. Depress the button again to
restart the program.
If the machine is already heating or the water
level is above the bottom edge of the door or
that the drum is turning. In this case the door
can not be opened.
If you can not open the door but you need to
open it you have to switch the machine off by
turning the selector dial to “Off”. After about 3
minutes the door can be opened (pay attention
to the water level and temperature!).
Altering an option or a running program
Interrupting a program
Opening the door after the program
has started
Energetic wash
Delicate wash
95 °C 60 °C 40 °C 30 °C
Max.wash
temperature
Max.wash
temperature
Max.wash
temperature
Max.wash
temperature
Hand wash
at all
Bleaching hcaelb ton oDretaw dloc ni hcaelB
Ironing
Hot iron max 200°C Warm iron max 150°C Lukewarm iron max 110°C
Do not iron
Dry cleaning Dry cleaning
in all solvents
Dry cleaning in perchlorethylene,
petrol, pure alcohol, R 111 & R 113
Dry cleaning in petrol,
pure alcohol and R 113
Do not
dry clean
Drying
Tumble dry
high
temperature
low
temperature
Do not
tumble dry
Do not wash
16