Filter
Top Products
15
Delay Start Button (continues)
The above options must be selected after choosing the
wash program with the dial, and before pressing the
Start/Pause button.
If after having set the delay start option (and pressed
Start/Pause button) and you wish the cancel it,
follow the below steps:
set the washing machine to PAUSE by pressing the
Start/Pause button;
deselect the Delay start option, changing the status;
press the Start/Pause button to start the program.
The selected delay can be changed only after selecting
the washing program again.
The door will lock through out the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the Start/Pause
button, after that you need to wait about 2-3 minutes to
release door lock, the Door Lock ( ) pilot light is
flashing to show the door release is in process, pilot light
switch off when the door can be opened.
Important!
The “Child Lock” feature will allow you to lock the controls
while the machine is running to prevent tampering.
ACTIVATE “Child Lock” by pressing the “Temperature”
and “Spin” buttons about 3 seconds, the padlock
symbol “ ” is displayed on the screen.
To DE-ACTIVE “Child Lock” simply press the “Temperature”
and “Spin” buttons about 3 seconds, the “ ”padlock
symbol in the screen will disappear.
Child Lock will remain activated until you de-activate it, even
if the machine is turned off.
Child Lock Option ( )
Acoustic Signals Option
The machine is provided of an acoustic device, which
sounds in the following cases:
By pressing the “Rinse Hold” and “Super Quick” buttons
simultaneously for about 3 seconds, the acoustic signal is
deactivated (except for the events of operating problems).
By pressing these 2 buttons again, the acoustic signal is
reactivated.
when selecting a wash program
when depressing the options buttons
at the end of the cycle
in the event of operating problems