Zanussi ZWH6140 P Washer User Manual


 
Open the door and re-
move the plastic hose
guide, the bag contain-
ing the instruction
booklet and the plastic
plug caps from the
drum.
Remove the power supply cable and the draining and
inlet hose from the hose holders (C) on the rear of
the appliance.
Unscrew the three bolts (A) and remove the hose
holders (C).
Slide out the relevant plastic spacers (B).
Warning! Do not re-
move the drain hose
from the rear support. Re-
move this hose only if it is
necessary to drain the wa-
ter. Refer to "Frost precau-
tion" and "What to do if".
Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
7