Zanussi ZWH6140 P Washer User Manual


 
1
Programme selector dial
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 7 starts flashing: the appliance is now switched on.
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 7 will flash 3
times to indicate a wrong selection. The appliance will not perform the new
selected programme.
To switch the appliance off, turn the programme selector dial to the posi-
tion
.
To cancel or change a running programme, switch the appliance off by
turning the programme selector dial to the position
. Select the new
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 7 again. The water in the tub will
be not emptied out.
2
Temperature button
90°
60°
40°
30°
Temp.
Push the temperature button to select the most suitable temperature for
washing your laundry .
3
Automatic Spin reduction and
No Spin
By selecting a programme, the appliance proposes automatically the maxi-
mum spin speed provided for that programme.
By selecting Automatic Spin reduction the spin speed is reduced to a half,
but not less than 400 rpm. The relevant light illuminates.
No Spin
By selecting this option, all spinning phases are suppressed and replaced
by a drain, so as not to wrinkle the laundry. Recommended for extremely
delicate fabrics. On some programmes the rinses will be performed with
more water.
4
Super Quick
l
e
n
sr
ep
u
S
le
n
sre
p
uS
e
d
i
p
a
R
By pressing this button the corresponding pilot light illuminates.
Short cycle for lightly soiled items or for laundry which needs only freshen-
ing up.
With this option, a reduced load of laundry is recommended:
Cottons 3,5 Kg
Synthetics and delicates 2 Kg
14