Filter
Top Products
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
15
If you need to open the door, you must first set
the washing machine to PAUSE by pressing
the Start/Pause ( ) button, after that you
need to wait about 2-3 minutes to release
door lock.
It is possible to change any option before the
program carries it out. The option “Quick Wash
( )” cannot be modified after the Start/Pause
has been pressed.
Changing a running program is possible only
by resetting it. Turn the program selector dial
to “O” and then to the new program position.
The washing water in the tub not be emptied
out. Start the new program by depressing the
“Start/Pause ( )” button again.
Depress the “Start/Pause ( )” button to
interrupt a program which is running, the
corresponding light starts to flash. Depress the
button again to restart the program.
If the machine is already heating or the water
level is above the bottom edge of the door or
that the drum is turning. In this case the door
can not be opened.
If you can not open the door but you need to
open it you have to switch the machine off by
turning the selector dial to “O”. After about 3
minutes the door can be opened (pay attention
to the water level and temperature!).
Altering an option or a running program
Interrupting a program
Opening the door after the program
has started
Energetic wash
Delicate wash
95 °C 60 °C 40 °C 30 °C
Max.wash
temperature
Max.wash
temperature
Max.wash
temperature
Max.wash
temperature
Hand wash
at all
Bleaching hcaelb ton oDretaw dloc ni hcaelB
Ironing
Hot iron max 200°C Warm iron max 150°C Lukewarm iron max 110°C
Do not iron
Dry cleaning Dry cleaning
in all solvents
Dry cleaning in perchlorethylene,
petrol, pure alcohol, R 111 & R 113
Dry cleaning in petrol,
pure alcohol and R 113
Do not
dry clean
Drying
Tumble dry
high
temperature
low
temperature
Do not
tumble dry
Do not wash