Filter
Top Products
9
Programme information
Rinse
With this programme it is possible to rinse and spin cotton garments
which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at maximum
speed. The spin speed can be reduced by pressing the relevant
button.
Drain
For emptying out the water of the last rinse in programmes with the
Rinse Hold or Night Cycle option.
Firstly, turn the programme selector dial to «Off», then select
programme Drain and press the button .
6
Easy Iron
By selecting this programme, the laundry is gently washed and spun
to avoid any creasing. In this way ironing is easier. Furthermore the
machine will perform additional rinses.
Cottons Eco
This programme can be selected for slightly or normally soiled
cotton items. The temperature will decrease and the washing time
will be extended. This allows you to obtain a good washing
efficiency whilst saving energy.
Spin
Separate spin for hand washed garments and after programmes
with Rinse Hold or Night Cycle option. Before selecting this
programme the selector dial must be turned to «Off». You can
choose the speed by pressing the relevant button to adapt it to the
fabrics to be spun.
Sport 40°
This programme is suitable for washing heavily soiled sport items of
synthetic fabrics. The machine will automatically add a prewash
phase before the main wash to eliminate mud stains.
Note ! We recommend that you do not put the detergent into the
compartment of the detergent drawer. The spin speed is
reduced.
Sport shoes 40°
With this programme it is possible to wash one pair of sport shoes.
The shoes would be gently washed and spun. Washing temperature
40°C. Note! Do not wash your sport shoes together with laundry.
Off = Cancelling
To reset a programme and to switch off the machine turn the
selector dial to «Off». A new programme can now be selected.
Wool and
Handwash
Washing programme for machine washable wool as well as for hand
washable woollens and delicate fabrics with the «hand washing»
care symbol .
Note: A single or bulky item may cause imbalance. If the appliance
doesn’t perform the final spin phase, add more items, redistribute
the load manually and then select the spinning programme.
132962460.qxd 01/07/2008 10.35 Pagina 9