Whirlpool 6LSR7244EQ0 Washer User Manual


 
14
TROUBLESHOOTING
COMMON WASHING PROBLEMS (CONT.)
Solution...
Sort lint givers (towels, chenille) from
lint takers (corduroy, synthetics). Also
sort by colour.
Lint can be trapped in load if over-
loaded. Wash smaller loads.
Clean out pockets before washing.
Use enough detergent to hold lint
in water.
Use wash water warmer than
21°C (70°F).
Use wash water warmer than
21°C (70°F).
Loads should move freely during
wash. Wash smaller loads.
Do not pour liquid bleach directly on
load. Wipe up bleach spills. Undiluted
bleach will damage fabrics.
Clean out pockets before washing.
Zip zippers before washing.
Mend rips and broken threads in
seams before washing.
Dilute fabric softener and add to
rinse portion of cycle only. Do not
drip fabric softener on clothes.
Install an iron filter.
Use enough detergent to remove soil
and hold it in suspension.
Sort dark clothing from whites and
lights.
Unload the washer as soon as it
stops.
Unload the washer as soon as it
stops.
Use the Permanent Press cycle or
another cycle with low spin speeds
to reduce wrinkling.
Loads should move freely during
wash. Wash smaller loads.
If safe for fabric, use warm or hot
wash water. Use cold rinse water.
Reverse hoses.
Cause...
Improper sorting.
Overloading.
Paper or tissue in pockets.
Not enough detergent.
Detergent not dissolving.
Wash water colder than 21°C (70°F).
Overloading. Improper use of washer.
Improper use of liquid bleach.
Sharp items not removed from pockets;
fasteners not fastened.
Items damaged before washing.
Improper use of fabric softener.
Iron (rust) in water.
Not enough detergent used, causing
soil to be redeposited.
Dye transfer due to not sorting loads
properly.
Dye transfer due to not unloading
washer promptly.
Not removing load promptly.
Wrong cycle for fabrics being washed.
Overloading.
Wash water not warm enough to relax
wrinkles. Use warm rinses.
Hoses reversed.
Problem...
Residue or lint
on load
Tearing
Stains on load
Load is wrinkled