Filter
Top Products
10
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and
pulled out, the washer fills (to the selected load size)
before agitation and timing start. The washer begins
agitating immediately after filling; agitation occurs
with the washer lid up or down.
During agitation, the agitator creates a continuous
rollover action that
provides a thorough
cleaning of the wash
load.
After agitation starts, the Cycle Control knob turns
clockwise until it points to an Off area and the
cycle ends.
NOTES:
•
The washer pauses briefly throughout each cycle.
These pauses are normal for washer operation.
•
On two-speed models, a Gentle Wash system
helps protect your fabrics by reducing wash
agitation speed during the last few minutes of
wash agitation in the Regular and Permanent
Press cycles.
Sequence of cycles
Fill
▼
Rinse
▼
Drain-No agitation
▼
Spin-Spray rinse
▼
Spin
▼
Off
Fill
▼
Wash selected time
▼
Drain
†
No agitation
▼
Spin
▼
WASH
RINSE
†
The Permanent Press cycle partially drains, fills, agitates
briefly, and drains.
OPERATING YOUR WASHER