Filter
Top Products
8. (OPTIONAL STEP) Set the Cycle
Signal selector to On if you want the
washer to alert you when the wash
cycle Is complete.
. The signal is helpful when you are
washing items that should be removed
from the washer as soon as the
cycle ends.
9. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want. See pages 8 and 9.
10. Pull out the Cycle Control Knob to
start the washer.
-
Cycle Signal
Stopping/restarting your washer
l To stop the washer at any time, push in
the Cycle Control Knob.
l To restart the washer, close the lid
(if necessary) and pull out the Cycle
Control Knob.
Selecting a cycle and time
This section illustrates and describes the
wash cycles you can select with the Cycle
Control Knob. Use this information to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
l The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
l Refer to page 9 to learn more about the
sounds you may hear during a wash cycle.
l Refer to page 10 to help you understand
what happens during a wash cycle.
continued on next page
7