Filter
Top Products
Using
spray rinse and spin
Press cycles. See
page-1 1.
Using
drain and spin
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills to the
selected water level with the selected water
temperature before agitation and timing start.
The washer will begin agitating immediately
after filling; agitation can occur with the washer
lid up or down. After agitation starts, the knob
turns clockwise until it points to OFF and the
cycle ends.
NOTES:
l
The spray-rinse washer continues to spin at
the end of the wash cycle. Fresh water is
added as the machine spins the load. There
is no fill.
l
The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
l
A Gentle Wash system helps protect your
fabrics by reducing wash agitation speed
during the last few minutes of wash agitation
in the Regular and Permanent Press cycles.
continued on next page
9