Filter
Top Products
Washer Connections
Model LPR6244A
H&e
connector
Permanent installation
This washer can be converted from
portable to permanent. Instructions for
permanent installation come with the
washer.
You will need two fill hoses, one
drain hose and four leveling legs.
These can be purchased from your
Whirlpool Dealer (Kit #285418).
Portable one faucet
connection
Use the hose connector provided with
the washer for a one faucet connec-
tion. See page 5 for a portable two
faucet connection.
To connect washer:
e Lift the hoses off the storage rack on
the back of the washer.
l
Attach the hose connector to the
faucet adapter by pulling down on
the locking collar while lifting up on
the connector until it snaps into
place.
l
Slowly turn on the water faucet all
the way.
l
Pull the electrical power cord from
the storage area in the back of the
washer. Plug the power cord into a
3-prong grounded outlet.
To disconnect washer:
Unplug the electrical power cord and
put it back in its storage area.
Turn the water faucet off.
Press the red Water Flow Button to
release the water pressure.
Move the locking collar down and
pull the hose connector down to
disengage from the faucet adapter.
Drain water from the hoses through
the hose connector.
Hang the hoses on the storage rack.